¿ ODBC Error Messages.DOC * In SQL Server Enterprise Manager, you may receive the "Invalid cursor state" error message when Microsoft(r) SQL Server(tm) runs out of resources while attempting to save selected tables or a database diagram. This error is returned because of insufficient space in your database or transaction log to complete the save process. To correct this problem, check to see if the database or the transaction log is full. If so, increase the size of the database to accommodate the change. Check other system resources or contact your system administrator. In addition to the standard ODBC error messages located in your ODBC programmer's reference documentation, the SQL Server ODBC driver can return error messages for certain SQLSTATE values, as shown in this table. SQLERROR returns SQLSTATE values as defined by the X/Open and SQL Access Group SQL CAE specification (1992). SQLSTATE values are strings that contain five characters. The following table lists SQLSTATE values that a driver can return for SQLError. The character string value returned for SQLSTATE consists of a two-character class value followed by a three-character subclass value. A class value of 01 indicates a warning and is accompanied by a return code of SQL_SUCCESS_WITH_INFO. Class values other than 01, except for the class IM, indicate an error and are accompanied by a return code of SQL_ERROR. The class IM is specific to warnings and errors that derive from the implementation of ODBC. The subclass value 000 in any class is for implementation defined conditions within the given class. The assignment of class and subclass values is defined by SQL-92. Note Although successful execution of a function is indicated typically by a return value of SQL_SUCCESS, the SQLSTATE 00000 also indicates success. SQLSTATE ODBC API (Driver Manager) error 00000 Success 01000 General warning 01002 Disconnect error 01004 Data truncated 01006 Privilege not revoked 01S00 Invalid connection string attribute 01S01 Error in row 01S02 Option value changed 01S03 No rows updated or deleted 01S04 More than one row updated or deleted 01S05 Cancel treated as FreeStmt/Close 01S06 Attempt to fetch before the result returned the first rowset 07001 Wrong number of parameters 07006 Restricted data type attribute violation 07S01 Invalid use of default paramater 08001 Unable to connect to data source 08002 Connection in use 08003 Connection not open 08004 Data source rejected establishment of connection 08007 Connection failure during transaction 08S01 Communication link failure 21S01 Insert value list does not match column list 21S02 Degree of derived table does not match column list 22001 String data right truncation 22002 Indicator variable required but not supplied 22003 Numeric value out of range 22005 Error in assignment 22008 Datetime field overflow 22012 Division by zero 22026 String data, length mismatch 23000 Integrity constraint violation 24000* Invalid cursor state 25000 Invalid transaction state 28000 Invalid authorization specification 34000 Invalid cursor name 37000 Syntax error or access violation 3C000 Duplicate cursor name 40001 Serialization failure 42000 Syntax error or access violation 70100 Operation aborted IM001 Driver does not support this function IM002 Data source name not found and no default driver specified IM003 Specified driver could not be loaded IM004 Driver's SQLAllocEnv failed IM005 Driver's SQLAllocConnect failed IM006 Driver's SQLSetConnectOption failed IM007 No data source or driver specified; dialog prohibited IM008 Dialog failed IM009 Unable to load translation DLL IM010 Data source name too long IM011 Driver name too long IM012 DRIVER keyword syntax error IM013 Trace file error S0001 Base table or view already exists S0002 Base table not found S0011 Index already exists S0012 Index not found S0021 Column already exists S0022 Column not found S0023 No default for column S1000 General error S1001 Memory allocation failure S1002 Invalid column number S1003 Program type out of range S1004 SQL data type out of range S1008 Operation canceled S1009 Invalid argument value S1010 Function sequence error S1011 Operation invalid at this time S1012 Invalid transaction operation code specified S1015 No cursor name available S1090 Invalid string or buffer length S1091 Descriptor type out of range S1092 Option type out of range S1093 Invalid parameter number S1094 Invalid scale value S1095 Function type out of range S1096 Information type out of range S1097 Column type out of range S1098 Scope type out of range S1099 Nullable type out of range S1100 Uniqueness option type out of range S1101 Accuracy option type out of range S1103 Direction option out of range S1104 Invalid precision value S1105 Invalid parameter type S1106 Fetch type out of range S1107 Row value out of range S1108 Concurrency option out of range S1109 Invalid cursor position S1110 Invalid driver completion S1111 Invalid bookmark value S1C00 Driver not capable S1DE0 No data at execution values pending S1T00 Timeout expired * In SQL Server Enterprise Manager, you may receive the "Invalid cursor state" error message when Microsoft(r) SQL Server(tm) runs out of resources while attempting to save selected tables or a database diagram. This error is returned because of insufficient space in your database or transaction log to complete the save process. To correct this problem, check to see if the database or the transaction log is full. If so, increase the size of the database to accommodate the change. Check other system resources or contact your system administrator. In addition to the standard ODBC error messages located in your ODBC programmer's reference documentation, the SQL Server ODBC driver can return error messages for certain SQLSTATE values, as shown in this table. SQLSTATE SQL SERVER DRIVER ERROR Description 01000 %ld rows sent to SQL Server. Total sent: %ld. A batch size of rows have been sent to SQL Server using the BCP API. 01000 %ld rows successfully bulk-copied to host-file. Total received: %ld. A batch size of rows have been written to the host file using the BCP API. 01000 Access to database configured in the DSN has been denied. Default used. Either the database does not exist or the user does not have permission to access the database. The default database configured for the login ID was used. 01000 An error has occurred during an attempt to access the log file, logging disabled. The log file for driver statistics or long-running queries could not be used. The logging of driver statistics or long-running queries has been disabled. 01000 Connected to backup server. The SQL Server primary server was not available, so the connection was made to the fallback server. 01000 Language configured in the DSN is not supported. Default used. Either the language name is invalid or the language is not installed on the server. The default language configured for the login ID was used. 01000 Null bit data forced to zero. A bit field containing a NULL is being loaded to a server that does not support NULL bit data. The field was set to zero. 01000 Procedure executed with 'EXEC'. No output parameters returned. The procedure could not be executed as an RPC and output parameters were specified. Because the procedure had to be executed with EXEC, no output parameters will be stored. 01000 SQL Debugging disabled. SQL Debugging could not be enabled, probably because the SQL Server is not configured for SQL debugging. 01000 The ODBC catalog stored procedures installed on server %s are version %s; version %02d.%02d.%4.4d or later is required to ensure proper operation. Please contact your system administrator. Install the ODBC catalog stored procedures by executing \Msqql\Install\Instcat.sql. 01000 Zero length data forced to length 1. A zero-length binary or character field is being loaded, but zero-length data is not supported. The field was forced to a 1 byte blank or binary zero. 01S02 Cursor concurrency changed. The application requested a concurrency that could not be honored because of the type of request or query. A different concurrency was used instead. 01S02 Cursor type changed. The application requested a cursor type that could not be honored because of the type of request or query. A different cursor type was used instead. 01S02 Packet size change not honored by server, server size used. The application requested a nondefault packet size that could not be supported by SQL Server. The server default size was used instead. 01S02 Packet size changed. The application requested a nondefault packet size that was outside of the limits of allowable size. Either the smallest or largest packet size was used instead, depending if the requested size was too small or too large. 01S02 Login timeout changed. The application requested a login time-out that was too large. The maximum login time out was used instead. 07006 Conversions not allowed using bcp_moretext. The application using bcp_moretext must have the same field type as it does the column type. 08004 Server rejected the connection; Access to selected database has been denied. Either the database does not exist or the user does not have permission to access the database. 08004 Server rejected the connection; Language specified is not supported. Either the language name is invalid or the language is not installed on SQL Server. HY024 Database is invalid or cannot be accessed. Either the database does not exist or the user does not have permission to access the database. IM006 Packet size change not supported by server, default used. The application requested a nondefault packet size that SQL Server does not support. The client default size was used. HY000 All bound columns are read-only. There must be an updatable column to use SQLSetPos or SQLBulkOperations to change or insert a row. HY000 An old netlib (%s) has been detected. Please delete it and restart the application. The netlib that was being loaded was out of date. The driver requires a newer netlib. The problem could be a netlib in the current directory of the application, which is being loaded instead of the one in the system directory, or it could be that the netlib was not installed properly or is corrupted. If the netlib specified in the error text exists elsewhere than in the Windows system directory, delete it. If the netlib exists only in the system directory, install the client utilities on the client and restart the application. HY000 Attempt to bulk-copy a NULL value into a Server column which does not accept NULL values. The field contains a NULL value, but the column does not allow NULL values. HY000 Attempt to bulk-copy an oversized column to the SQL Server. The length supplied for a column is larger than the column definition in the table. HY000 Attempt to read unknown version of BCP format file. The header line in the bcp format file was not a recognized version. HY000 Bad bulk-copy direction. Must be either IN or OUT. The bcp_init call did not specify a valid direction for the eDirection parameter. HY000 Bad terminator. The terminator string supplied in bcp_bind is invalid. HY000 Bcp host-files must contain at least one column. No columns were selected to be loaded. HY000 Cannot generate SSPI context. The driver could not obtain an SSPI context required for integrated security. The native error will contain the Win32 error code. HY000 Cannot initialize SSPI package. The driver could not obtain an SSPI context required for integrated security. The native error will contain the Win32 error code. HY000 Communication module is not valid. Driver has not been correctly installed. The network library .dll is corrupted. Install the client utilities on the client and restart the application. HY000 Connection is busy with results for another hstmt. The SQL Server ODBC driver allows only one active hstmt. For more information, see Using Default Result Sets. HY000 Connection is not enabled for BCP. The application using the BCP API must set the SQLSetConnectAttr or SQL_SS_COPT_BCP attribute before connecting. HY000 Failure during closing of connection. The ConnectionClose function in the network library failed. This problem is typically caused by a network or SQL Server problem. HY000 For BCP, all variable-length data must have either a length-prefix or a terminator specified. bcp_bind was called with SQL_VARYLEN_DATA, but neither a prefix length nor a terminator was specified. HY000 Host-file columns may be skipped only when copying into the server. A bcp out format file specified that a column should be skipped. This is not allowed. Either create a view containing only the desired columns and bcp out from that view, or use the -Q flag to provide a SELECT statement selecting only the desired columns. HY000 Incorrect host-column number found in BCP format-file. The format file contains a column number greater than the number of columns in the table. HY000 I/O error while reading bcp data-file. HY000 I/O error while reading BCP format file. HY000 I/O error while writing bcp data-file. HY000 I/O error while writing bcp error-file. HY000 Invalid option. The eOption parameter to bcp_control was not valid. HY000 Non-default parameter not allowed after default parameter. Parameters to a stored procedure cannot have a non-default value after any preceding parameter has been specified with the default value. HY000 Not enough columns bound. For a bcp out, not all columns of the table were bound. Either create a view which contains only the desired columns and bcp out from that view or, use the -Q flag to provide a SELECT statement selecting only the desired columns. HY000 ODBC BCP/Driver version mismatch. The Sqlsrv32.dll and Odbcbcp.dll .dlls do not have identical versions. Install the client utilities on the client and restart the application. HY000 Protocol error in TDS stream. The TDS stream from the server is invalid. This problem is typically caused by a SQL Server problem. Check the SQL Server error log. HY000 Table contains less rows than first row count. A starting row number was supplied, but the table on the server did not contain that number of rows. No rows were copied to the host-file. HY000 Table contains less rows than last row count. An ending row number was supplied, but the table on the server did not contain that number of rows. HY000 Table has no text/image columns. bcp_moretext was called, but the table does not contain any text or image columns. HY000 TDS buffer length too large. The TDS stream from the server is invalid. This problem is typically caused by a SQL Server problem. Check the SQL Server error log. HY000 Text column data incomplete. The summation of the lengths supplied by bcp_moretext did not match the length supplied in bcp_bind or bcp_collen. HY000 The BCP host-file contains less rows than first row count. A starting row number was supplied, but the host-file did not contain that number of rows. No rows were loaded. HY000 The row length exceeds SQL Server's maximum allowable size. The summation of the data lengths for a row is larger than the maximum row size. HY000 The stored procedure required to complete this operation could not be found on the server (they were supplied with SQL Server). Please contact your system administrator. Install the ODBC catalog stored procedures by executing \Msqql\Install\Instcat.sql. HY000 Unable to load communication module. Driver has not been correctly installed. The network library .dll specified for the connection does not exist on this client. Install the client utilities on the client and restart the application. HY000 Unable to open BCP host data-file. The file name specified in the bcp_init call does not exist or is opened by another application. HY000 Unable to open BCP error-file. The error file name specified in the bcp_init call does not exist or is opened by another application. HY000 Unable to read driver version. The driver was unable to read the version block in its .DLL. Install the client utilities on the client and restart the application. HY000 Unexpected EOF encountered in BCP data-file. During a bcp in operation, end-of-file was detected on the data file while in the middle of processing the last row. This is typically caused by having a different number of columns, types, nullability, or sizes between the original table and the table being loaded. HY000 Unicode conversion failed. An error occurred during conversion to or from a Unicode string. The native error will contain the Win32 error code. HY000 Unicode conversion failed. The code page of the SQL server must be installed on the client system. The server code page must exist on the client for proper operation. Either clear the Auto Translate check box for the DSN or install the code page of the server on the client. The server code page can be determined by running EXEC sp_server_info 18. HY000 Unknown token received from SQL Server. The TDS stream from the server is invalid. This error is typically caused by a problem on the server. Check the SQL Server error log. HY000 Warning: Partial insert/update. The insert/update of a text or image column(s) did not succeed. A failure during insertion or update of a text, image, or ntext column occurred. That column will not contain the proper data. Roll back the transaction, if possible. (c)1988-2000 Microsoft Corporation. All Rights Reserved.